NSN 5305-00-505-3333
High Torque Screw
Between 1.386 inches and 1.416 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number LS15234C08-18 for national stock number 5305005053333.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3333.
-
MPN or Model
LS15234C08-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.386 inches and 1.416 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1680-00-008-6211 MPN 4F20040-115AAircraft Torque Tube Assembly
- 1560-00-009-4180 MPN 4F77252-102AFus Hinge Support
- 1560-00-015-4805 MPN MAG5664-187Fl Adapter Assembly
- 1560-00-015-4899 MPN 3W23321-102Flap Panel Assembly
- 1560-00-021-8395 MPN 3P96008-105Disconnect Sleeve
- 1560-00-028-9519 MPN 781718-1Navigation Lig Ring
- 1560-00-072-7829 MPN 3P32513-101Aircraft Structural Component Support
- 1560-00-075-8994 MPN 3P34804-101Pulley Support Engine Co Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3333 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234C08-18 | Lockheed Martin Corporation |
LS15234C08-18 | Lockheed Martin Corporation |