NSN 5305-00-505-3356
High Torque Screw
Between 0.453 inches and 0.483 inches fastener length, flat countersunk head style, between 0.355 inches and 0.397 inches head diameter, grip diameter: between 0.2485 inches and 0.3495 inches .
Manufacturer part number LS15237C4-2 for national stock number 5305005053356.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3356.
-
MPN or Model
LS15237C4-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 0.453 inches and 0.483 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2485 inches and 0.3495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-8659 MPN BM19070-4-801Close Tolerance Screw
- 5305-00-505-4063 MPN LS15237-3-6Close Tolerance Screw
- 5305-00-855-7964 MPN NAS1123C2Close Tolerance Screw
- 5305-01-013-9598 MPN BM19031-7-19DClose Tolerance Screw
- 5305-01-043-8050 MPN NAS1189E08P20HNKSocket Head Cap Screw
- 5305-01-106-7522 MPN HT4067-3-3Close Tolerance Screw
- 5305-01-116-9174 MPN HT4057-3-7AClose Tolerance Screw
- 5305-01-142-8381 MPN HT4049-5D13YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3356 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237C4-2 | Lockheed Martin Corporation |
LS15237C4-2 | Huck International, Inc. |
LS15237C4-2 | Sps Technologies, Llc |
LS15237C4-2 | Hi-shear Corporation |
LS15237C4-2 | Alcoa Global Fasteners, Inc. |
LS15237C4-2 | Lisi Aerospace Canada Corp |
Stock Check
- NE: 69
- NS: 1