NSN 5305-00-505-3430
High Torque Screw
Between 0.703 inches and 0.733 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15237-3-6D for national stock number 5305005053430.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3430.
-
MPN or Model
LS15237-3-6D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 0.703 inches and 0.733 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.576 inches first hole and 0.626 inches first hole -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-809-0728 MPN 51B333-1Machine Screw
- 5305-01-008-6725 MPN HT4028L6-10Close Tolerance Screw
- 5305-01-046-5447 MPN HT4011-6-12Shoulder Screw
- 5305-01-047-0372 MPN ST3M653C3-5AShoulder Screw
- 5305-01-101-8535 MPN HT4024L5-4-1Close Tolerance Screw
- 5305-01-158-5373 MPN SC2163-5-6Machine Screw
- 5305-01-168-1202 MPN SC1786RV4-6Close Tolerance Screw
- 5305-01-169-7211 MPN LD111-0044-2418Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-505-3430 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-3-6D | Lockheed Martin Corporation |
LS15237-3-6D | Arconic Global Fasteners & Rings, |
LS15237-3-6D | Huck International, Inc. |
LS15237-3-6D | Sps Technologies, Llc |
LS15237-3-6D | Hi-shear Corporation |
LS15237-3-6D | Lisi Aerospace Canada Corp |
LS15237-3-6D | Alcoa Global Fasteners, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)