NSN 5305-00-505-3971
High Torque Screw
Between 1.676 inches and 1.706 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15235C4-22 for national stock number 5305005053971.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3971.
-
MPN or Model
LS15235C4-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.676 inches and 1.706 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-014-1501 MPN 934611-101Branched Electrical Special Purpose Cable Assembly
- 1680-00-042-8304 MPN 3302094-1Engine Oil Plate Assy
- 1560-00-082-5352 MPN 4W33204-101BAircraft Access Cover
- 1560-00-104-5718 MPN 3P33542-101Aircraft Access Cover
- 1560-00-130-0220 MPN 4P31012-131AGenerator Cooling Duct Assembly
- 4920-00-131-7545 MPN 4S94289-101AMultiposition Maintenance Fixture Holder
- 1560-00-161-4145 MPN 4P22119-101ACowl Door Latch Brace
- 1560-00-172-0301 MPN 4P53236-107AInboard Pylon Mount Strap
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3971 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C4-22 | Lockheed Martin Corporation |