NSN 5305-00-505-3977
High Torque Screw
Between 2.301 inches and 2.331 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15235C4-32 for national stock number 5305005053977.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3977.
-
MPN or Model
LS15235C4-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 2.301 inches and 2.331 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-011-1499 MPN 3W24011-121Aircraft Structural Component Fitting
- 1560-00-034-7619 MPN 791390-2Pylon Tube Assembly
- 1680-00-076-4920 MPN 3C13007-105Remote Control Lever
- 1560-00-081-0638 MPN 4E22135-109ABaggage Compartment Liner Panel
- 1680-00-113-1846 MPN 4C63072-101AReaction Cylinder Assembly
- 1560-00-121-9819 MPN 3P22602-101Aircraft Access Cover
- 1560-00-135-3806 MPN 397586-4Aircraft Structural Component Fitting
- 5985-00-141-5971 MPN EEP1661-121Waveguide Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3977 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C4-32 | Lockheed Martin Corporation |