NSN 5305-00-505-3995
High Torque Screw
Between 2.676 inches and 2.706 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15235C4-38 for national stock number 5305005053995.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3995.
-
MPN or Model
LS15235C4-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 2.676 inches and 2.706 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.356 inches and 2.386 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-011-1835 MPN 4A99040-101AAir Turbine Valve Cover
- 1560-00-015-9050 MPN 3W12012-101Leading Panel Assembly
- 1560-00-021-8541 MPN 3A99010-101Aircraft Thermal Insulation Pipe Covering
- 1560-00-027-1406 MPN 766893-33Insulation Blanket
- 1680-00-064-0445 MPN 374051Aircraft Torque Tube Assembly
- 1560-00-075-8909 MPN 3F20183-101Aircraft Windshield Panel
- 1560-00-077-0187 MPN 3F30105-287Door Seal Retainer
- 1560-00-092-4097 MPN LS685-2Inspection Doubler
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3995 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C4-38 | Lockheed Martin Corporation |