NSN 5305-00-505-4060
High Torque Screw
Between 0.578 inches and 0.608 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AN515C-5-10 for national stock number 5305005054060.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-4060.
-
MPN or Model
AN515C-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 0.578 inches and 0.608 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-481-9323 MPN TX1026C4-9AFClose Tolerance Screw
- 5305-01-512-8276 MPN TX1027C6-14AFClose Tolerance Screw
- 5306-01-168-5631 MPN 801651-4-19Close Tolerance Bolt
- 5306-01-188-6840 MPN ST3M571-6D24Close Tolerance Bolt
- 5306-01-286-8472 MPN ST3M747-9D45Close Tolerance Bolt
- 5306-01-493-5544 MPN 122897L4-10FClose Tolerance Bolt
- 5320-01-145-1631 MPN HLT252TB-8-15Pin-rivet
- 5320-01-338-8739 MPN HL113VAP-10-10Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-4060 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN515C-5-10 | United Technologies Corporation |
LS15237-3-4 | Lockheed Martin Corporation |
LS15237-3-4 | Huck International, Inc. |
LS15237-3-4 | Sps Technologies, Llc |
LS15237-3-4 | Hi-shear Corporation |
LS15237-3-4 | Alcoa Global Fasteners, Inc. |
LS15237-3-4 | Lisi Aerospace Canada Corp |
LS15237-3-4 | Sps Technologies Inc |