NSN 5305-00-505-4063
High Torque Screw
Between 0.703 inches and 0.733 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15237-3-6 for national stock number 5305005054063.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-4063.
-
MPN or Model
LS15237-3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 0.703 inches and 0.733 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-1675 MPN 3MA335CFA6-5Machine Screw
- 5305-00-310-6416 MPN HT4028L7-12Close Tolerance Screw
- 5305-00-905-5568 MPN 3006T69P01Socket Head Cap Screw
- 5305-01-010-9916 MPN 0SC2177TE4-08Machine Screw
- 5305-01-105-1809 MPN CHT4067-4-9Close Tolerance Screw
- 5305-01-141-7194 MPN HT4020-5-22YShoulder Screw
- 5305-01-145-5449 MPN HT4041-7-16-9XShoulder Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-4063 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-3-6 | Lockheed Martin Corporation |
LS15237-3-6 | Arconic Global Fasteners & Rings, |
LS15237-3-6 | Huck International, Inc. |
LS15237-3-6 | Sps Technologies, Llc |
LS15237-3-6 | Hi-shear Corporation |
LS15237-3-6 | Alcoa Global Fasteners, Inc. |
LS15237-3-6 | Lisi Aerospace Canada Corp |
LS15237-3-6 | Huck Intl Inc |