NSN 5305-00-505-4182
High Torque Screw
Between 0.766 inches and 0.796 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LS15237C3-7 for national stock number 5305005054182.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-4182.
-
MPN or Model
LS15237C3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-3350 MPN HT8138-4-5TClose Tolerance Screw
- 5305-01-046-3343 MPN ST3M495-5-8Shoulder Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-126-5264 MPN HT4049-6D14Close Tolerance Screw
- 5305-01-138-7739 MPN HT4041-4-11-5Close Tolerance Screw
- 5305-01-141-7913 MPN HT4008-5-20Shoulder Screw
- 5305-01-191-7496 MPN HT4020-4-5AXShoulder Screw
- 5305-01-197-6512 MPN BACB30NT4-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-4182 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237C3-7 | Lockheed Martin Corporation |
LS15237C3-7 | Arconic Global Fasteners & Rings, |
LS15237C3-7 | Sps Technologies, Llc |
LS15237C3-7 | Hi-shear Corporation |
LS15237C3-7 | Lisi Aerospace Canada Corp |
LS15237C3-7 | Huck Intl Inc |