NSN 5305-00-505-4220
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LS15237C3-11 for national stock number 5305005054220.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-4220.
-
MPN or Model
LS15237C3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-01-038-9555 MPN BACB30LH3-5Close Tolerance Screw
- 5305-01-141-7195 MPN 3M902C5-9AShoulder Screw
- 5305-01-196-5578 MPN HT4058-3-13AClose Tolerance Screw
- 5305-01-218-4548 MPN BACB30LR4U22Close Tolerance Screw
- 5305-01-310-3962 MPN HT4049-4D23Close Tolerance Screw
- 5305-01-330-2553 MPN SC5049-3-9Machine Screw
- 5305-01-381-1408 MPN SC5053-4-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-4220 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237C3-11 | Lockheed Martin Corporation |
106363C3-11 | Sps Technologies, Llc |
LS15237C3-11 | Arconic Global Fasteners & Rings, |
LS15237C3-11 | Hi-shear Corporation |
LS15237C3-11 | Sps Technologies, Llc |
LS15237C3-11 | Lisi Aerospace Canada Corp |
LS15237C3-11 | Sps Technologies, Llc |
LS15237C3-11 | Alcoa Global Fasteners, Inc. |