NSN 5305-00-507-2152
High Torque Screw
Between 0.886 inches and 0.916 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number LS15234C08-10 for national stock number 5305005072152.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-507-2152.
-
MPN or Model
LS15234C08-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-021-5205 MPN 4T12104-101AAircraft Access Cover
- 1560-00-070-8625 MPN 3F11261-101Pod Door Hinge Fitting
- 1560-00-084-0129 MPN 377372-2Inboard Flap Link Pan
- 1560-00-089-4313 MPN 938211-119Aircraft Door
- 4820-00-097-0325 MPN 695049-3Poppet Drain Cock
- 1560-00-128-8998 MPN 3T50000-128Aircraft Elevator
- 1560-00-140-4647 MPN 957015-123Aircraft Leading Edge
- 1680-00-147-3668 MPN 4C22221-601ARudde Pedal Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-507-2152 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234C08-10 | Lockheed Martin Corporation |
LS15234C08-10 | Lockheed Martin Corporation |