NSN 5305-00-507-2161
High Torque Screw
Between 2.136 inches and 2.166 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15265V3-30 for national stock number 5305005072161.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-507-2161.
-
MPN or Model
LS15265V3-30
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 2.136 inches and 2.166 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-006-5087 MPN 695813Check Valve
- 1560-00-009-0794 MPN 4F77237-192BAircraft Structural Panel
- 1560-00-021-8425 MPN 3A99011-101Aircraft Thermal Insulation Pipe Covering
- 1560-00-022-0215 MPN 763869-95Conduit Tube
- 1560-00-035-2153 MPN 338127RAircraft Window Panel
- 4920-00-043-2926 MPN 4S30004-101ATest Adapter Kit
- 1560-00-047-5209 MPN 318215Piping Connector Adapter
- 1560-00-081-0678 MPN 4C52978-101AOverride Spring Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-507-2161 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265V3-30 | Lockheed Martin Corporation |
LS15265V3-30 | Lockheed Martin Corporation |