NSN 5305-00-507-2164
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number LS15265-08-4 for national stock number 5305005072164.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-507-2164.
-
MPN or Model
LS15265-08-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-014-6166 MPN 4J14056-101BLeading Edge Slat Pad
- 1680-00-015-4194 MPN 412988-101Seat Separator Support
- 1560-00-015-4685 MPN 3C11063-107Output Servo Arm
- 1560-00-027-1393 MPN 766892-47Insulation Blanket
- 1560-00-027-1414 MPN 767537-3Lower Instrum Panel
- 1560-00-027-1417 MPN 767720-1Housing Ring
- 1560-00-030-1529 MPN 784933-1Blind Rod Assembly
- 1560-00-052-6331 MPN 4W13535-113BAircraft Skin
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-507-2164 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265-08-4 | Lockheed Martin Corporation |