NSN 5305-00-508-2818
High Torque Screw
Between 0.863 inches and 0.893 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15266V4-9 for national stock number 5305005082818.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-2818.
-
MPN or Model
LS15266V4-9
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.863 inches and 0.893 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-012-8045 MPN 3W12028-101Aircraft Structural Panel
- 1560-00-015-4856 MPN 3W23149-101Spoiler Flap Hinge
- 1560-00-018-5212 MPN 769832-9Ventral Fin Shim
- 1560-00-019-7265 MPN 760974-505Aircraft Skin
- 1560-00-027-1446 MPN 779656-501Ma Bracket Assembly
- 1680-00-077-0048 MPN 781782-101Upwar Hose Assembly
- 1560-00-081-0723 MPN 4F61809-101ACargo Door Fitting
- 1560-00-106-8776 MPN 4F43762-101AAircraft Access Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-2818 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15266V4-9 | Lockheed Martin Corporation |
LS15266V4-9 | Lockheed Martin Corporation |