NSN 5305-00-508-3056
High Torque Screw
Between 0.489 inches and 0.519 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number LS15265V4-3 for national stock number 5305005083056.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-3056.
-
MPN or Model
LS15265V4-3
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.489 inches and 0.519 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-045-8710 MPN PWA22345Aircraft Engine Maintenance Fixture
- 4920-00-406-9368 MPN PWA22372Interface Device Adapter Assembly
- 4920-00-516-7276 MPN PWA52595Test Adapter
- 4920-00-776-6518 MPN PWA16421Interface Device Adapter Assembly
- 4920-01-018-3261 MPN PWA34162Bellmouth Clamp Assembly
- 4920-01-093-4516 MPN PWA55188Static Balance Locating Plug Set
- 4920-01-111-1869 MPN PWA55516Aircraft Engine Maintenance Fixture
- 4920-01-224-7683 MPN PWA57162Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-3056 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265V4-3 | Lockheed Martin Corporation |
AN515C-10-12 | United Technologies Corporation |
LS15265V4-3 | Lockheed Martin Corporation |
AN515C-10-12 | United Technologies Corporation |