NSN 5305-00-508-3230
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, flat countersunk head style, between 0.355 inches and 0.397 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15237C4-11 for national stock number 5305005083230.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-3230.
-
MPN or Model
LS15237C4-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-015-4918 MPN 3W2332L-101Flap Panel Assembly
- 1560-00-022-3849 MPN 3P21006-101Nose Cowling Frame
- 1560-00-027-1317 MPN 789809-1Panel Assembly-lowe
- 1560-00-047-3545 MPN 146786Aircraft Structural Component Fitting
- 1560-00-069-8155 MPN 3A99012-107Aircraft Thermal Insulation Pipe Covering
- 1560-00-084-4976 MPN 4C51958-102BPulley Bracket Assembly
- 1560-00-088-0669 MPN 4F41242-104DAircraft Floor
- 1560-00-097-9376 MPN 4J11024-202AAircraft Leading Edge
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-3230 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237C4-11 | Lockheed Martin Corporation |