NSN 5305-00-508-3234
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, between 0.105 inches and 0.115 inches head height, 160000 pounds per square inch min. tensile strength (psi), material: iron alloy 660 .
Manufacturer part number LS15234C08-4 for national stock number 5305005083234.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-3234.
-
MPN or Model
LS15234C08-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response
More from these suppliers
- 1560-00-009-2694 MPN 4F77168-134ANose Fairing Rib
- 1560-00-011-1667 MPN 4A92009-106ABleed Air Duct Assembly
- 1560-00-015-8987 MPN 3W33114-176Trailing Edge Panel Assembly
- 1560-00-022-3850 MPN 3E42203-114Aircraft Structural Plate
- 1560-00-074-3364 MPN 3F21123-101Nose Landing Gear Door Hinge
- 1560-00-076-4892 MPN 3A30026-107Aircraft Duct Insulation
- 1560-00-082-5392 MPN 4P02002-101BAircraft Structural Component Support
- 1560-00-102-4916 MPN 4F61107-101ACargo Door Carrage Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-3234 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234C08-4 | Lockheed Martin Corporation |