NSN 5305-00-508-5375
High Torque Screw
Between 1.926 inches and 1.956 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15235C4-26 for national stock number 5305005085375.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-5375.
-
MPN or Model
LS15235C4-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.926 inches and 1.956 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-032-4375 MPN 68184-3-7Machine Screw
- 5305-00-407-5470 MPN SFT930-4-8Close Tolerance Screw
- 5305-00-514-8251 MPN LS15267V3-22Machine Screw
- 5305-00-591-4147 MPN 66904H4-12Shoulder Screw
- 5305-01-005-4022 MPN HT4020-3-5AClose Tolerance Screw
- 5305-01-006-9329 MPN LS15263-3-6Machine Screw
- 5305-01-069-8910 MPN NAS1203-64Close Tolerance Screw
- 5305-01-167-4054 MPN 04007Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-5375 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C4-26 | Lockheed Martin Corporation |
LS15235C4-26 | Sps Technologies, Llc |
LS15235C4-26 | Hi-shear Corporation |
LS15235C4-26 | Alcoa Global Fasteners, Inc. |
LS15235C4-26 | Lisi Aerospace Canada Corp |
LS15235C4-26 | Lockheed Martin Corporation |