NSN 5305-00-508-6231
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15266V3-8 for national stock number 5305005086231.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-6231.
-
MPN or Model
LS15266V3-8
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
100 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-5087 MPN LS15267V3-24Machine Screw
- 5305-01-028-2470 MPN ST3M652C4-6AClose Tolerance Screw
- 5305-01-047-9441 MPN BACB30LU4-7Close Tolerance Screw
- 5305-01-492-4568 MPN 3M1170C3-4AFClose Tolerance Screw
- 5306-00-901-2066 MPN VFK100G-06060Shear Bolt
- 5306-01-044-5196 MPN VAL23607-5D25Shoulder Bolt
- 5306-01-254-7269 MPN VCG0002-3D7Close Tolerance Bolt
- 5306-01-344-4323 MPN VCC0090-6-20Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-6231 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15266V3-8 | Lockheed Martin Corporation |
AN515C2-5 | United Technologies Corporation |
LS15266V3-8 | Sps Technologies, Llc |
LS15266V3-8 | Valley-todeco, Inc. |
LS15266V3-8 | Arconic Global Fasteners & Rings, |
LS15266V3-8 | Sps Technologies, Llc |
LS15266V3-8 | Molex Incorporated |
LS15266V3-8 | Molex Incorporated |