NSN 5305-00-508-6893
High Torque Screw
Between 1.176 inches and 1.206 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15235C4-14D for national stock number 5305005086893.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-6893.
-
MPN or Model
LS15235C4-14D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.176 inches and 1.206 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.050 inches and 1.100 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-308-1672 MPN E125-101Machine Screw
- 5305-00-527-4567 MPN NAS334CPA7-5Close Tolerance Screw
- 5305-00-850-3013 MPN NAS1101-08-6Machine Screw
- 5305-00-874-4290 MPN NAS1134-8Close Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-045-4305 MPN HT4016-4-6YShoulder Screw
- 5305-01-076-4931 MPN HT4020-5-10AXShoulder Screw
- 5305-01-101-9439 MPN HT4067-3-8DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-6893 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C4-14D | Lockheed Martin Corporation |
LS15235C4-14D | Huck International, Inc. |
LS15235C4-14D | Sps Technologies, Llc |
LS15235C4-14D | Alcoa Global Fasteners, Inc. |
LS15235C4-14D | Hi-shear Corporation |
LS15235C4-14D | Lisi Aerospace Canada Corp |
LS15235C4-14D | Lockheed Martin Corporation |