NSN 5305-00-508-6949
High Torque Screw
Between 0.551 inches and 0.581 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15266V4-4 for national stock number 5305005086949.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-508-6949.
-
MPN or Model
LS15266V4-4
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.551 inches and 0.581 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-6537 MPN 3M1169D3-2AFClose Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-435-8326 MPN BACB30LU9-42Close Tolerance Screw
- 5305-01-502-4665 MPN 3M1169C4-12AClose Tolerance Screw
- 5305-01-512-8299 MPN 3M1170D6-18AClose Tolerance Screw
- 5306-01-004-9527 MPN VAL23029-8D29Close Tolerance Bolt
- 5306-01-005-0472 MPN VAL23029-4-14Close Tolerance Bolt
- 5306-01-025-6435 MPN VAL23029-4-13Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-508-6949 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15266V4-4 | Lockheed Martin Corporation |
LS15266V4-4 | Sps Technologies, Llc |
LS15266V4-4 | Valley-todeco, Inc. |
LS15266V4-4 | Arconic Global Fasteners & Rings, |
LS15266V4-4 | Sps Technologies, Llc |
LS15266V4-4 | Alcoa Global Fasteners, Inc. |
LS15266V4-4 | Molex Incorporated |
LS15266V4-4 | Lockheed Martin Corporation |