NSN 5305-00-512-5263
High Torque Screw
Between 1.564 inches and 1.594 inches fastener length, flat countersunk head style, between 0.692 inches and 0.763 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number LS15235C6-19D for national stock number 5305005125263.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-5263.
-
MPN or Model
LS15235C6-19D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.564 inches and 1.594 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.692 inches and 0.763 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.434 inches first hole and 1.484 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-509-8092 MPN TX1027C5-5AClose Tolerance Screw
- 5305-01-535-6807 MPN TX1027C4-7AClose Tolerance Screw
- 5320-01-010-3708 MPN HL911-5-18Pin-rivet
- 5320-01-145-4396 MPN HLT253DL-12-11Pin-rivet
- 5320-01-328-1562 MPN HLT333FBA-12-14Pin-rivet
- 5320-01-342-6075 MPN HLT51YB-6-8Pin-rivet
- 5320-01-356-0110 MPN HLT452SS-8-7Pin-rivet
- 5320-01-364-7119 MPN HLT453SS-8-17Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-5263 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C6-19D | Lockheed Martin Corporation |
LS15235C6-19D | Huck International, Inc. |
LS15235C6-19D | Sps Technologies, Llc |
LS15235C6-19D | Hi-shear Corporation |
LS15235C6-19D | Alcoa Global Fasteners, Inc. |
LS15235C6-19D | Lisi Aerospace Canada Corp |
LS15235C6-19D | Sps Technologies Inc |