NSN 5305-00-512-6103
High Torque Screw
Retaining balls in shank.
Manufacturer part number CA2654-4-17 for national stock number 5305005126103.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-6103.
-
MPN or Model
CA2654-4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 1.481 inches and 1.501 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.395 inches first hole and 1.411 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-8676 MPN CA4710-0409Socket Head Cap Screw
- 5305-00-253-5230 MPN CA2652-04-31Close Tolerance Screw
- 5305-00-842-1590 MPN CA2730-4-33Close Tolerance Screw
- 5305-01-190-5729 MPN CA2834-12Panel Screw Assembly
- 5305-01-303-6354 MPN CA29048-08-650Panel Screw Assembly
- 5305-01-442-0754 MPN CA21062-10-10-17Close Tolerance Screw
- 5306-00-866-0773 MPN CA2754-2Special Bolt
- 5306-01-518-8737 MPN CA21387-6-13TXInternal Wrenching Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-6103 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-4-17 | Arconic Global Fasteners & Rings, |
AS126-4-17 | Avibank Mfg., Inc. |