NSN 5305-00-512-6208
High Torque Screw
Retaining element in shank.
Manufacturer part number CA2654-5-18 for national stock number 5305005126208.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-6208.
-
MPN or Model
CA2654-5-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 1.603 inches and 1.623 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.610 inches and 0.625 inches -
Head Height
Between 0.157 inches and 0.172 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 1.125 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.490 inches first hole and 1.510 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-620-7797 MPN CA21078-3Ring C313 Nrp
- 5305-00-151-9817 MPN CA2630-0469Close Tolerance Screw
- 5305-01-137-3946 MPN CA1114-2-9PPanel Screw Assembly
- 5305-01-322-9621 MPN CA13000-10-3-10QPanel Screw Assembly
- 5305-01-523-4456 MPN CA28080C4B-20HSAirc Screw Assembly
- 5305-01-191-0411 MPN AS292-4-37Close Tolerance Screw
- 5306-01-096-5595 MPN AS165-107Machine Bolt
- 5320-01-572-7355 MPN ADBB147-1Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-6208 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-5-18 | Arconic Global Fasteners & Rings, |
AS126-5-18 | Avibank Mfg., Inc. |