NSN 5305-00-512-6397
High Torque Screw
Retaining balls in shank.
Manufacturer part number CA2654-4-70 for national stock number 5305005126397.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-6397.
-
MPN or Model
CA2654-4-70
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 4.793 inches and 4.813 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 4.375 inches and 4.391 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.708 inches first hole and 4.724 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-455-6995 MPN CA1114-3-8PExternally Relieved Body Screw
- 5305-01-143-9685 MPN CA21170-3-9Machine Screw
- 5305-01-188-7279 MPN CA2651-3-09Close Tolerance Screw
- 5305-01-468-0003 MPN CA21063-06-6-9Panel Fastener Screw
- 5305-01-219-2968 MPN AVL275-4-18Panel Screw Assembly
- 5306-00-486-5663 MPN AS194-4-20Close Tolerance Bolt
- 5306-01-046-2854 MPN AS233Machine Bolt
- 5306-01-537-0083 MPN AS522-7-42Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-6397 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-4-70 | Arconic Global Fasteners & Rings, |
AS126-4-70 | Avibank Mfg., Inc. |