NSN 5305-00-512-6418
High Torque Screw
Retaining balls in shank.
Manufacturer part number CA2654-4-14 for national stock number 5305005126418.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-6418.
-
MPN or Model
CA2654-4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.293 inches and 1.313 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.875 inches and 0.891 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.208 inches first hole and 1.224 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-010-2619 MPN CA30011-2LSocket Head Cap Screw
- 5305-01-078-7244 MPN CA28080-3B-7HSPanel Screw Assembly
- 5305-01-249-5842 MPN CA13231-08-2-405Panel Screw Assembly
- 5305-01-338-2845 MPN CA 11014-08B-4-9Panel Screw Assembly
- 5306-01-646-1557 MPN JSFB18E4-4Internal Wrenching Bolt
- 1560-01-357-4657 MPN 55789Aircraft Cover Rod Assembly
- 5305-00-151-8653 MPN AS108-04-56Close Tolerance Screw
- 5305-01-025-4861 MPN AS169-8-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-6418 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-4-14 | Arconic Global Fasteners & Rings, |
AS126-4-14 | Avibank Mfg., Inc. |