NSN 5305-00-512-6433
High Torque Screw
Between 1.122 inches and 1.142 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.095 inches and 0.110 inches .
Manufacturer part number CA2654-3-12 for national stock number 5305005126433.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-6433.
-
MPN or Model
CA2654-3-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 1.122 inches and 1.142 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.095 inches and 0.110 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.829 inches and 0.860 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.043 inches first hole and 1.059 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-087-5062 MPN 43624-17Keeper Assembly
- 5305-01-014-0172 MPN CA2109-2HSPanel Screw Assembly
- 5305-01-089-6019 MPN CA1174B-4-12SPanel Screw Assembly
- 5305-01-194-9153 MPN CA28102-08B-12HSPanel Screw Assembly
- 5305-01-510-2308 MPN CA2292-10-52-33Panel Screw Assembly
- 5305-00-536-6829 MPN AS254B6-24Close Tolerance Screw
- 5305-01-133-7206 MPN AS301-4-09Close Tolerance Screw
- 5305-01-490-6727 MPN ET261AC4-5Aircr Captive Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-6433 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-3-12 | Arconic Global Fasteners & Rings, |
AS126-3-12 | Avibank Mfg., Inc. |