NSN 5305-00-512-6435
High Torque Screw
Retaining balls inshank.
Manufacturer part number CA2654-4-12 for national stock number 5305005126435.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-512-6435.
-
MPN or Model
CA2654-4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.168 inches and 1.188 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.750 inches and 0.766 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.083 inches first hole and 1.099 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-023-8195 MPN 3030-C-10Stud Terminal
- 5306-01-462-8433 MPN SLB748-12D38Close Tolerance Bolt
- 5306-01-646-1927 MPN JSFB24-4-14Close Tolerance Bolt
- 5305-01-487-1380 MPN FX10-15010-1PPanel Screw Assembly
- 5305-01-541-5157 MPN CA2254-4-19Hexagon Head Cap Screw
- 1560-01-650-7697 MPN JSFM31-2Aircraft Strut
- 5305-00-151-8690 MPN AS108-04-13Close Tolerance Screw
- 5305-01-646-1998 MPN JSFB26-6-23FClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-512-6435 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-4-12 | Arconic Global Fasteners & Rings, |
AS126-4-12 | Avibank Mfg., Inc. |
VP1131-4-12 | Space-lok, Inc. |