NSN 5305-00-515-9172
Bolt Stove
Between 0.923 inches and 0.968 inches fastener length, flat countersunk head style, between 0.692 inches and 0.766 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number NAS517-6-5 for national stock number 5305005159172.
Datasheet
-
Product description
Machine Screw NSN 5305-00-515-9172.
-
MPN or Model
NAS517-6-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.513 inches and 0.671 inches -
Fastener Length
Between 0.923 inches and 0.968 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.692 inches and 0.766 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response or an-s-9 military standard single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-687-0853 MPN NAS714-11Electrical Receptacle Connector
- 1560-01-423-0215 MPN NAS6706D19Aircraft Structural Component Support
- 5305-00-007-9894 MPN NAS1102C04-10PMachine Screw
- 5305-00-051-2354 MPN NAS387-832-24PMachine Screw
- 5305-00-052-9056 MPN MS24630-44Tapping Screw
- 5305-00-063-3840 MPN NAS1244-11Shoulder Screw
- 5305-00-084-3957 MPN NAS1174-2Close Tolerance Screw
- 5305-00-141-6282 MPN NAS1191E04P18LSocket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-515-9172 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-6-5 | National Aerospace Standards |