NSN 5305-00-519-6720
High Torque Screw
0.840 inches fastener length, pan no. 2 head style, between 0.370 inches and 0.372 inches head diameter, head height: 0.190 inches .
Manufacturer part number 65651-11297-103 for national stock number 5305005196720.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-519-6720.
-
MPN or Model
65651-11297-103
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.240 inches -
Fastener Length
0.840 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.370 inches and 0.372 inches -
Head Height
0.190 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
0.600 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
90.0 microinches -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ss8435, fscm 78286 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-027-6625 MPN S6152-62503-101Rh Aft Pul Corner Lh Fwd Fitting
- 1680-00-082-3352 MPN 61902-60245-041Drop Tank Control Panel
- 1560-00-097-7265 MPN 65205-08024-046Fuel Tank Support Fairing
- 1560-00-250-5333 MPN 65201-03049-051Support Ins Fitting
- 5985-00-254-6555 MPN 6460-65010-041Antenna
- 1560-00-256-3364 MPN S6120-62515-011Aircraft Window Panel
- 1680-00-446-3400 MPN 65502-01005-110Seat Support
- 1560-00-700-3169 MPN S6120-62285Cargo Corner Former
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-519-6720 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65651-11297-103 | Sikorsky Aircraft Corporation |