NSN 5305-00-522-9629
High Torque Screw
Between 1.142 inches and 1.172 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number ST3M454-4DL11 for national stock number 5305005229629.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-522-9629.
-
MPN or Model
ST3M454-4DL11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.142 inches and 1.172 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.021 inches first hole and 1.061 inches first hole -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-015-3365 MPN ST3M454-3L9Close Tolerance Screw
- 5305-01-414-2180 MPN VCL0009-6-24Close Tolerance Screw
- 5305-01-435-8521 MPN BACB30LU9-41Close Tolerance Screw
- 5305-01-475-1148 MPN VCL0009-7D28Close Tolerance Screw
- 5306-00-508-6599 MPN VAL23611-6D58Close Tolerance Bolt
- 5306-01-018-5588 MPN MS21250-08076Shear Bolt
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
- 5306-01-054-3427 MPN VCG0009L7-16Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-522-9629 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M454-4DL11 | Boeing Company, The |
HT4025L4D11 | Sps Technologies, Llc |
ST3M454-4DL11 | Fastener Innovation Technology, Inc. |
HT4025L4D11 | Hi-shear Corporation |
HT4025L4D11 | Alcoa Global Fasteners, Inc. |
ST3M454-4LD11 | Boeing Company, The |
HT4025L4D11 | Sps Technologies, Llc |
ST3M454-4DL11 | Valley-todeco, Inc. |
HT4025L4D11 | Arconic Global Fasteners & Rings, |
ST3M454-4DL11 | Heartland Precision Fasteners, Inc. |
HT4025L4D11 | Huck International, Inc. |
ST3M454-4DL11 | Houston Precision Fasteners I, Lp |
HT4025L4D11 | Sps Technologies, Llc |
ST3M454-4DL11 | Sps Technologies, Llc |
11905-4DL11 | Reid Products Inc. |
11905-4LD11 | Reid Products Inc. |
WC4025L-4D11 | West Coast Aerospace Inc |
HT4025L4D11 | Sps Technologies Ltd Tj Brooks |
HT4025L4D11 | Lisi Aerospace Canada Corp |
HT4025L4D11 | Huck Intl Inc |
10125354 | Nimikkeistokeskus Ncb Finland |
ST3M454-4DL11 | Alcoa Global Fasteners, Inc. |