NSN 5305-00-525-9313
High Torque Screw
1.900 inches fastener length, flat countersunk head style, between 0.930 inches and 0.940 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 90-8452 for national stock number 5305005259313.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-525-9313.
-
MPN or Model
90-8452
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
095190 - Hardware, NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
1.900 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.930 inches and 0.940 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.760 inches first hole -
Surface Finish
63.0 microinches threads -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-073-4010 MPN 107C2354-3Spring Centering Piston
- 1560-00-123-9735 MPN 69-28919-2Engine Fairlead
- 5935-00-154-4523 MPN BACC45FN20-41PElectrical Receptacle Connector
- 1560-00-333-6508 MPN 4-3725-104Aircraft Fairing
- 1560-00-403-2959 MPN 5-65509-3001Quandrant Assembly
- 1680-00-608-9876 MPN 66-4602Car Button Fastener
- 1560-00-623-9753 MPN 5-87435-40Aircraft Access Cover
- 1680-00-654-5040 MPN 65-6241-41Seam Cap Strip
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-525-9313 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
90-8452 | The Boeing Company |