NSN 5305-00-528-4758
High Torque Screw
Between 0.872 inches and 0.892 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.095 inches and 0.110 inches .
Manufacturer part number CA2654-3-08 for national stock number 5305005284758.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-528-4758.
-
MPN or Model
CA2654-3-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 0.872 inches and 0.892 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.095 inches and 0.110 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.579 inches and 0.610 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.793 inches first hole and 0.809 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-790-9651 MPN FX10-1580-1TSQuick Re Screw Assy
- 5305-01-255-9408 MPN CA28121-7Panel Screw Assembly
- 5305-01-561-7298 MPN CA22043-10-0420Panel Screw Assembly
- 1680-01-536-9185 MPN ST273-103Aircraft Door Uplock Assembly
- 5305-00-512-6103 MPN AS126-4-17Close Tolerance Screw
- 5306-01-428-9510 MPN AS 368A4-12Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-528-4758 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2654-3-08 | Arconic Global Fasteners & Rings, |
AS126-3-8 | Avibank Mfg., Inc. |