1-321-802-5889

NSN 5305-00-528-4759

High Torque Screw

About this product

Between 1.185 inches and 1.205 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.095 inches and 0.110 inches .

Manufacturer part number CA2654-3-13 for national stock number 5305005284759.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-00-528-4759.

  • MPN or Model

    CA2654-3-13

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.263 inches and 0.314 inches
  • Fastener Length
    Between 1.185 inches and 1.205 inches
  • Head Style
    Pan no. 2
  • Head Diameter
    Between 0.360 inches and 0.374 inches
  • Head Height
    Between 0.095 inches and 0.110 inches
  • Grip Diameter
    Between 0.1889 inches and 0.1894 inches
  • Shank Unthreaded Hole Diameter
    0.070 inches first hole and 0.080 inches first hole
  • Internal Drive Style
    Slot
  • Thread Diameter
    0.190 inches
  • Grip Length
    Between 0.891 inches and 0.922 inches
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    160000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.105 inches first hole and 1.121 inches first hole
  • Surface Finish
    63.0 microinches grip
  • Material
    Iron alloy 660
  • Material Specification
    Ams 5732 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-00-528-4759 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305005284759

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
CA2654-3-13 Arconic Global Fasteners & Rings,
AS126-3-13 Avibank Mfg., Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.