NSN 5305-00-529-1108
High Torque Screw
Between 0.574 inches and 0.604 inches fastener length, flat countersunk head style, between 0.344 inches and 0.385 inches head diameter, grip diameter: between 0.1870 inches and 0.1895 inches .
Manufacturer part number 3MFR1221-3-4T for national stock number 5305005291108.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-529-1108.
-
MPN or Model
3MFR1221-3-4T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 0.574 inches and 0.604 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.344 inches and 0.385 inches -
Grip Diameter
Between 0.1870 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and primer -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification 1st treatment response and ps 13421 fscm 76301 mfr ref 2nd treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-043-5263 MPN 32-30001-6Engine Air Du Angle
- 1560-00-064-1076 MPN 53-39243-89Aircraft Access Door
- 1560-00-175-3969 MPN 53G970504-3Aircraft Structure Assembly
- 1560-00-226-5403 MPN 53-13001-0622Wing Dive Brake Flap
- 1560-00-357-2822 MPN 68A180001-1006Wing Landing Flap
- 5975-00-419-9812 MPN 75D631000-2145Electrical Components Tiedown Strap
- 1560-00-441-6753 MPN 32-58183-301Aircraft Access Door
- 1560-00-445-8565 MPN 32-831650-9Duct Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-529-1108 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFR1221-3-4T | Boeing Company, The |
3MFR1221-3-4T | Boeing Company, The |
3MFR1221-3-4T | Boeing Company, The |
3MFR1221-3-4T | Boeing Company, The |
3MFR1221-3-4T | Boeing Company, The |
3MFR1221-3-4T | Boeing Company, The |
3MFR1221-3-4T | Boeing Company, The |