NSN 5305-00-530-6160
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, flat countersunk head style, 0.3813 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 3MFRA583-10T for national stock number 5305005306160.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-530-6160.
-
MPN or Model
3MFRA583-10T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Flat countersunk -
Head Diameter
0.3813 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 4130 or steel comp 6150 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6758 military specification 5th material response or mil-s-8503 military specification 6th material response -
Surface Treatment
Cadmium head and primer head -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification 1st treatment response head and ps 13421, fscm 76301 mfr ref 2nd treatment response head -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-005-1353 MPN 53-79271-303Sidewinder Relay Panel Assembly
- 1560-00-012-1971 MPN 32-33259-13Drag Chute Angle
- 5935-00-064-2407 MPN 3M270-14BElectrical Connector Retaining Plate
- 4920-00-066-3143 MPN 53E250004-301Electronic Systems Test Set
- 4920-00-143-0761 MPN 53E150522-1Cable Set Adapter
- 1560-00-145-5871 MPN 32-35215-45Airframe Tee
- 1560-00-151-6438 MPN 53-11025-76Door Missile Well
- 1560-00-231-9179 MPN 53-42001-113Door Strut Clip
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-530-6160 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA583-10T | Boeing Company, The |