NSN 5305-00-530-6173
High Torque Screw
Between 2.973 inches and 3.003 inches fastener length, flat countersunk head style, 0.6335 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 3MA585-39T for national stock number 5305005306173.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-530-6173.
-
MPN or Model
3MA585-39T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.526 inches and 0.576 inches -
Fastener Length
Between 2.973 inches and 3.003 inches -
Head Style
Flat countersunk -
Head Diameter
0.6335 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 2.427 inches and 2.447 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 4130 or steel comp 6150 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6758 military specification 5th material response or mil-s-8503 military specification 6th material response -
Surface Treatment
Cadmium head and primer head -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification 1st treatment response head and ps 13421, fscm 76301 mfr ref 2nd treatment response head -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-017-0624 MPN 32-32431-122Seal Panel Web
- 1560-00-050-0000 MPN 32-33002-248Aircraft Skin
- 1560-00-055-5511 MPN 32-11113-7Actuator Support Fitting
- 1560-00-073-1520 MPN 53-32522-11Aircraft Access Door
- 1560-00-173-3930 MPN 53G970678-4Aircraft Skin
- 1560-00-264-1530 MPN 68A324700-2045Aircraft Skin
- 1560-00-280-6415 MPN 68A350721-2001Canopy Jettison Support
- 4920-00-317-3868 MPN AK168411500-2Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-530-6173 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA585-39T | Boeing Company, The |
3MFRA585-39T | Boeing Company, The |