NSN 5305-00-530-6174
High Torque Screw
Between 1.430 inches and 1.450 inches fastener length, flat chamfer head style, between 0.5565 inches and 0.5615 inches head diameter, head height: between 0.368 inches and 0.375 inches .
Manufacturer part number 53G970852-5 for national stock number 5305005306174.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-530-6174.
-
MPN or Model
53G970852-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.640 inches and 0.680 inches -
Fastener Length
Between 1.430 inches and 1.450 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.5565 inches and 0.5615 inches -
Head Height
Between 0.368 inches and 0.375 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.437 inches -
Grip Length
Between 0.770 inches and 0.790 inches -
Width Across Flats
Between 0.3125 inches and 0.3160 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
63.0 microinches threads -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000, cond c military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps13101, type 2 class 3, fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-008-3838 MPN 68D110031-1001Lox Converter Vent Adapter
- 1560-00-082-9038 MPN 32-321616-7Fuselage Engine Insulation
- 1560-00-128-6785 MPN 32-65826-302Spring Cartridge As
- 1560-00-203-8422 MPN 53-32557-6Bell Crank
- 1560-00-287-7058 MPN 68A113027-2024Wing Section Hinge
- 1560-00-299-3735 MPN 68A113004-2012Aircraft Skin
- 1560-00-356-1858 MPN 53G970154-5Nose Shield
- 4920-00-377-2943 MPN 68D230025-1001Test Adapter Kit
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-530-6174 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53G970852-5 | Boeing Company, The |
53G970852-5 | Mercer Products & Manufacturing |