NSN 5305-00-531-3968
High Torque Screw
Between 0.952 inches and 0.999 inches fastener length, flat countersunk head style, between 0.629 inches and 0.634 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT123-5-7 for national stock number 5305005313968.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-531-3968.
-
MPN or Model
HT123-5-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.504 inches and 0.571 inches -
Fastener Length
Between 0.952 inches and 0.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.629 inches and 0.634 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 44.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5736 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-905-5568 MPN 3006T69P01Socket Head Cap Screw
- 5305-01-050-4308 MPN HT4008-3-19Shoulder Screw
- 5305-01-141-7915 MPN HT4016-3-15XShoulder Screw
- 5305-01-142-6287 MPN HT4020-4-16AXShoulder Screw
- 5305-01-193-2381 MPN SC1777A08-8Close Tolerance Screw
- 5305-01-209-9372 MPN HT4016-4-20XShoulder Screw
- 5305-01-211-1476 MPN HT4057-3-10AClose Tolerance Screw
- 5305-01-271-3279 MPN BACB30LH3-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-531-3968 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT123-5-7 | Huck International, Inc. |
HT1029A5-7 | Arconic Global Fasteners & Rings, |
54291-5-7 | Sps Technologies, Llc |
HT5N7 | Hi-shear Corporation |
HT5N7 | Lisi Aerospace Canada Corp |
3M123-5-7 | Boeing Company, The |
3M123-5-7 | Sps Technologies Inc |
54291-5-7 | Sps Technologies Inc |
HT123-5-7 | Huck Intl Inc |
HT1029A5-7 | Alcoa Global Fasteners, Inc. |