NSN 5305-00-531-7450
High Torque Screw
Between 1.512 inches and 1.559 inches fastener length, flat countersunk head style, between 0.783 inches and 0.890 inches head diameter, grip diameter: between 0.4357 inches and 0.4367 inches .
Manufacturer part number VS2545T7F17 for national stock number 5305005317450.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-531-7450.
-
MPN or Model
VS2545T7F17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.440 inches and 0.507 inches -
Fastener Length
Between 1.512 inches and 1.559 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.783 inches and 0.890 inches -
Grip Diameter
Between 0.4357 inches and 0.4367 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-421-6648 MPN 3MA336PA16Close Tolerance Screw
- 5305-00-434-1326 MPN NAS1101-3H16Machine Screw
- 5305-00-969-4762 MPN AIC1351-024Socket Head Cap Screw
- 5305-01-050-9002 MPN AIC984-7-16PClose Tolerance Screw
- 5305-01-095-1489 MPN SK2015-753Machine Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
- 5305-01-202-8979 MPN BACB30LK3-7Close Tolerance Screw
- 5305-01-259-9763 MPN AIC1651-3-5PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-531-7450 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T7F17 | Alcoa Global Fasteners, Inc. |
SFT22-7A17 | Sps Technologies, Llc |
AIC82-7-17 | Sps Technologies, Llc |
SFT22-7A17 | Sps Technologies, Llc |
C082-7-17 | Lockheed Martin Corporation |