NSN 5305-00-536-6816
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369-413 for national stock number 5305005366816.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-536-6816.
-
MPN or Model
MS3369-413
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 1.231 inches and 1.251 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.400 inches and 0.430 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.812 inches and 0.828 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.145 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Aams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-763-2957 MPN CA13170-3-3-10FSKPanel Screw Assembly
- 5305-00-856-9460 MPN CA2821-1Machine Screw
- 5305-01-011-4999 MPN CA2630-0431Close Tolerance Screw
- 5306-00-395-4998 MPN CA2652-04-18Close Tolerance Bolt
- 5306-01-471-8792 MPN CA21285-14Internal Wrenching Bolt
- 5320-01-056-1566 MPN HL87-10Pin-rivet Collar
- 5305-00-179-9439 MPN AS116-03-08Close Tolerance Screw
- 5306-01-096-5598 MPN AS165-106Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-536-6816 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369-413 | Military Standards |
CA2658-4-13 | Arconic Global Fasteners & Rings, |
AS169-4-13 | Avibank Mfg., Inc. |