NSN 5305-00-536-6822
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B520 for national stock number 5305005366822.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-536-6822.
-
MPN or Model
MS3369B520
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 1.728 inches and 1.748 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 1.250 inches and 1.266 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.625 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-929-0945 MPN P196D428-08Pilots Floor Plug
- 5305-01-054-2521 MPN CA2104-8HSSocket Head Cap Screw
- 5306-01-096-5594 MPN AS165-103Machine Bolt
- 5306-01-112-1248 MPN 53695-5-4Machine Bolt
- 5950-00-028-1544 MPN MS90542-03Radio Frequency Coil
- 5935-00-051-1539 MPN MS24266R16T24P6Electrical Plug Connector
- 5935-00-080-7584 MPN MS3108B20-2SCElectrical Plug Connector
- 5940-00-113-3140 MPN MS20659-125Lug Terminal
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-536-6822 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B520 | Military Standards |
AS169-5-20 | Avibank Mfg., Inc. |
CA2658-5-20 | Arconic Global Fasteners & Rings, |