NSN 5305-00-538-7073
High Torque Screw
Between 0.830 inches and 0.860 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LU3-8 for national stock number 5305005387073.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-538-7073.
-
MPN or Model
BACB30LU3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.830 inches and 0.860 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-462-2724 MPN 3M1169V3-10AClose Tolerance Screw
- 5305-01-475-3195 MPN 3M1170V3-3AClose Tolerance Screw
- 5306-01-040-3365 MPN BACB30LJ6DU19Close Tolerance Bolt
- 5306-01-043-5711 MPN VAL22034-8GS16Shear Bolt
- 5306-01-055-6918 MPN BACB30MT6-21Shear Bolt
- 5306-01-058-0738 MPN VFK101G5-014Shear Bolt
- 5306-01-061-4464 MPN BACB30FD5-10Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-538-7073 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU3-8 | The Boeing Company |
BACB30LU3-8 | Huck International, Inc. |
BACB30LU3-8 | Federal Manufacturing Corporation |
BACB30LU3-8 | Valley-todeco, Inc. |
BACB30LU3-8 | Sps Technologies, Llc |
BACB30LU3-8 | Arconic Global Fasteners & Rings, |
BACB30LU3-8 | Sps Technologies, Llc |
BACB30LU3-8 | Alcoa Global Fasteners, Inc. |
BACB30U3-8 | Sps Technologies, Llc |
BACB30LU3-8 | Sps Technologies, Llc |
BACB30LU3-8 | Sonic Industries Inc. |
BACB30LU3-8 | Arconic Global Fasteners & Rings, |
BACB30LU3-8 | Huck Intl Inc |