NSN 5305-00-539-5097
High Torque Screw
Between 0.640 inches and 0.687 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: 0.1894 inches .
Manufacturer part number NAS333CF5 for national stock number 5305005395097.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-539-5097.
-
MPN or Model
NAS333CF5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
0.1894 inches -
Shank Unthreaded Hole Diameter
0.020 inches first hole -
Single Shear Strength
2620 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.1885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.507 inches first hole and 0.527 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf -
Specification Data
80205-nas333 professional/industrial association standard
More from these suppliers
- 5940-01-382-0217 MPN NAS1063B216-225Terminal Board Marker Strip
- 5305-00-003-9208 MPN NAS1189-6T10LSocket Head Cap Screw
- 5305-00-007-9879 MPN NAS1100C04-4PMachine Screw
- 5305-00-058-0779 MPN MS24678-68CSocket Head Cap Screw
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
- 5305-00-082-6739 MPN MS51959-111Machine Screw
- 5305-00-121-2342 MPN MS27039C1-30Machine Screw
- 5305-00-150-9565 MPN MS24694-147Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-539-5097 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CF5 | National Aerospace Standards |