NSN 5305-00-541-0770
High Torque Screw
Between 0.973 inches and 1.003 inches fastener length, flat countersunk head style, between 0.461 inches and 0.507 inches head diameter, grip diameter: between 0.2470 inches and 0.2495 inches .
Manufacturer part number 3MFR1221-4-9T for national stock number 5305005410770.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-541-0770.
-
MPN or Model
3MFR1221-4-9T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.501 inches and 0.551 inches -
Fastener Length
Between 0.973 inches and 1.003 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.461 inches and 0.507 inches -
Grip Diameter
Between 0.2470 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and primer -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification 1st treatment response and ps 13421, fscm 76301 mfr ref 2nd treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-121-9487 MPN 32-21201-27Teardrop Assembly
- 1560-00-172-7425 MPN 32-21130-52Aircraft Spar
- 1560-00-175-3967 MPN 53G970838-18Aircraft Skin
- 1560-00-238-4504 MPN 32-32254-5Aircraft Structural Component Fitting
- 4920-00-268-2921 MPN 113D9045G1Stick Force Sensor Test Fixture
- 1680-00-409-7108 MPN 53G790005A34Wire Bundle Assembl
- 5975-00-419-9812 MPN 75D631000-2235Electrical Components Tiedown Strap
- 1560-00-421-3363 MPN 15-84124Arresting Gear Contact
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-541-0770 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFR1221-4-9T | Boeing Company, The |