NSN 5305-00-541-9194
High Torque Screw
Between 1.461 inches and 1.508 inches fastener length, flat countersunk head style, between 0.825 inches and 0.890 inches head diameter, grip diameter: between 0.4358 inches and 0.4367 inches .
Manufacturer part number 106706T7-13 for national stock number 5305005419194.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-541-9194.
-
MPN or Model
106706T7-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.665 inches -
Fastener Length
Between 1.461 inches and 1.508 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.825 inches and 0.890 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Color
Blue -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response or mil-c-8837 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7811 MPN SFH22D6A18Machine Screw
- 5305-00-079-2587 MPN 73573-4-27CSocket Head Cap Screw
- 5305-00-151-7974 MPN CVC241-3-16Machine Screw
- 5305-00-225-9874 MPN SFH22D6A12Machine Screw
- 5305-00-246-7449 MPN 652478-3-3Close Tolerance Screw
- 5305-00-324-9284 MPN HT4025L4D46Close Tolerance Screw
- 5305-00-364-9544 MPN HT4025L4-17Close Tolerance Screw
- 5305-00-510-5300 MPN LS15263V4-18Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-541-9194 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706T7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |
106706H7-13 | Sps Technologies, Llc |