NSN 5305-00-541-9319
High Torque Screw
Between 1.995 inches and 2.042 inches fastener length, flat countersunk head style, between 0.950 inches and 1.017 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 106706T8-20 for national stock number 5305005419319.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-541-9319.
-
MPN or Model
106706T8-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.735 inches and 0.802 inches -
Fastener Length
Between 1.995 inches and 2.042 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.950 inches and 1.017 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response or mil-c-8873 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2587 MPN 100-161-5-6Pin-rivet
- 5305-00-246-7449 MPN 652478-3-3Close Tolerance Screw
- 5305-00-519-7205 MPN HT4024L6-11Close Tolerance Screw
- 5305-00-889-6866 MPN NAS1204-36Close Tolerance Screw
- 5305-01-044-0720 MPN 67077-08-10Machine Screw
- 5305-01-054-6258 MPN 121558-3-A11PClose Tolerance Screw
- 5305-01-091-7929 MPN 66904H8-24Shoulder Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-541-9319 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |
106706T8-20 | Sps Technologies, Llc |