NSN 5305-00-543-4942
High Torque Screw
Between 1.193 inches and 1.234 inches fastener length, flat countersunk head style, between 2.752 inches and 2.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CF11 for national stock number 5305005434942.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-543-4942.
-
MPN or Model
NAS336CF11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.621 inches and 0.682 inches -
Fastener Length
Between 1.193 inches and 1.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 2.752 inches and 2.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
10500 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.990 inches first hole and 1.010 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5940-01-336-8434 MPN NAS1057T6-050Stud Terminal
- 5940-01-357-3664 MPN NAS1063A14-12Terminal Board Marker Strip
- 5305-00-003-6824 MPN NAS6002U26Machine Screw
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
- 5305-00-059-3658 MPN NAS1635-3-7Machine Screw
- 5305-00-085-3226 MPN MS3212-34Machine Screw
- 5305-00-151-5688 MPN MS27039C0819Machine Screw
- 5305-00-153-8485 MPN MS24629-72Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-543-4942 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CF11 | National Aerospace Standards |