NSN 5305-00-543-5523
Bobbin Screw
About this product
2.500 inches fastener length, flat countersunk head style, between 0.437 inches and 0.491 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS16199-84 for national stock number 5305005435523.
Datasheet
-
Product description
Wood Screw NSN 5305-00-543-5523.
-
MPN or Model
MS16199-84
-
Schedule B
7415.33.0500 (Threaded copper screws for wood) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Fastener Length
2.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.437 inches and 0.491 inches -
Internal Drive Style
Cross recess type 1 -
Min. Tensile Strength (psi)
50000 pounds per square inch -
Nonmachine Thread Style
Wood screw (type wd) -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Nonmachine Thread Diameter
0.242 inches -
Material
Copper alloy 651 -
Material Specification
Qq-c 591 federal specification single material response
More from these suppliers
- 5935-00-001-5920 MPN MS27484T14A35SAElectrical Plug Connector
- 5935-00-006-5643 MPN MS3128F14-5PWElectrical Receptacle Connector
- 5935-00-090-7062 MPN MS3152R16Electrical Connector Cable Clamp
- 5935-00-090-7111 MPN MS24264G14T15SElectrical Receptacle Connector
- 5905-00-104-8344 MPN MS35043-178Composition Fixed Resistor
- 5935-00-132-2539 MPN MS17350N24Electrical Connector Cover
- 5935-00-137-7440 MPN MS27473T22A2SAElectrical Plug Connector
- 5940-00-151-9380 MPN MS35444-1Lug Terminal
Wood Screw
An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.
Pricing and Availability
Get a quote for 5305-00-543-5523 wood screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16199-84 | Military Standards |
Stock Check
Availability for this item was last checked on 08/11/23.
The quantities and conditions available at the time were:
- NE: 180
- NS: 103