NSN 5305-00-543-5719
Tap Bolt
1.250 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS35293-62 for national stock number 5305005435719.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-543-5719.
-
MPN or Model
MS35293-62
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
69000 pounds per square inch -
Hardness Rating
100.0 rockwell b -
Material
Steel -
Surface Treatment
Phosphate -
Thread Series Designator
Unc
More from these suppliers
- 5945-00-276-9264 MPN 1450Electromagnetic Relay
- 5935-00-729-8554 MPN 8599853-025Electrical Receptacle Connector
- 4920-00-736-8838 MPN 6799283Engine Adapter Kit
- 4920-00-794-7656 MPN 6799870Test Adapter
- 1560-00-820-3738 MPN A51P60464-3Aircraft Thermal Insulation Pipe Covering
- 1680-00-858-0686 MPN 5669333Stop Washer
- 5905-00-951-9633 MPN 7926000-153Composition Fixed Resistor
- 5305-00-021-6306 MPN 216306Hexagon Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-543-5719 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35293-62 | Military Standards |
FFS85TYPE2STYLE10P | Federal Specifications |
120248 | General Motors Corp |